F Ball Styccobond F54 High Grab Linoleum Adhesive 5L

Product Information

The F Ball Styccobond F54 High Grab Linoleum Adhesive 5L is a solvent-free emulsion adhesive specifically produced for the installation of linoleum floor coverings. This product boasts a high initial grab, and is protected against biodegradation, thereby offering considerable resistance to breakdown over time. Importantly, its manufacture takes into consideration the need for underfloor heating installations and it is suitably designed to operate efficiently under such circumstances. It is noteworthy for its broad range of application, enabling it to be used in securing a variety of linoleum sheet and tile floor coverings.

This adhesive is a product of rigorous testing, having met the required standards set by the International Maritime Organisation and thus, certified suitable for marine floor installations. Its wide application extends to STOPGAP smoothing underlayments and a host of structurally-sound, smooth, and dry subfloors such as those made of concrete and sand-cement screed, plywood, flooring-grade chipboard, and hardboard. Other nonabsorbent surfaces suitable for use with this adhesive include sound flooring-grade asphalt and STOPGAP waterproof surface membranes, which must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

F Ball Styccobond F54 High Grab Linoleum Adhesive 5L is off-white in colour, with a creamy consistency. It offers an open time of up to 30 minutes, which is dependent on the temperature, humidity and absorbency of the subfloor. The adhesive gives a coverage rate of approximately 3m² per litre when applied with a 2mm x 6mm or B1 trowel, and a coverage per unit of 15m² when a 2mm x 6mm trowel is used. It is important to note that the coverage rates may vary depending on the condition and absorbency of the subfloor.

Product Overivew

- The F Ball Styccobond F54 High Grab Linoleum Adhesive 5L is specifically created for linoleum floor covering installations.
- It’s known for its high initial grab, making it a strong and durable adhesive.
- It's protected against biodegradation, providing considerable resistance to breakdown over time.
- It's manufactured with underfloor heating installations in mind, thereby operating efficiently under such conditions.
- The product's broad application varies from linoleum sheet to tile floor coverings.
- This adhesive has met the required standards of the International Maritime Organisation, making it suitable for marine floor installations.
- Suitable for use with various structurally-sound, smooth and dry subfloors like concrete, plywood, flooring-grade chipboard, hardboard and sand-cement screed.
- Also applicable with nonabsorbent surfaces such as sound flooring-grade asphalt and STOPGAP waterproof surface membranes.
- It's off-white in colour and has a creamy consistency.
- It provides an open time of up to 30 minutes, depending on subfloor conditions.
- Each litre of adhesive provides a coverage rate of approximately 3m² when applied with a 2mm x 6mm or B1 trowel.
- A unit offers coverage of 15m² when a 2mm x 6mm trowel is used. However, actual coverage rates may vary based on the subfloor's condition and absorbency.

Further information related to F Ball Styccobond F54 High Grab Linoleum Adhesive 5L

Check out the full range of F Ball available to buy online through Flooring HUT. We can also introduce you to a much more varied selection of Flooring Tools from other leading brands and manufacturers in the UK.