F Ball Styccobond F54 High Grab Linoleum Adhesive 5L

Information About F Ball Styccobond F54 High Grab Linoleum Adhesive 5L

F Ball Styccobond F54 High Grab Linoleum Adhesive 5L is a solvent-free emulsion adhesive for installing linoleum floorcoverings. It is designed to provide a high initial grab. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.

STYCCOBOND F54 High Grab Linoleum Adhesive can be used for securing a wide range of linoleum sheet and tile floorcoverings.

STYCCOBOND F54 High Grab Linoleum Adhesivehas have been tested to the standards of the International Maritime Organisation and approved for use in marine floor installations.

STYCCOBOND F54 High Grab Linoleum Adhesive can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.

STOPGAP waterproof surface membranes, sound flooring grade asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

• Colour: Off White
• Consistency: Creamy
• Open Time: Up to 30 minutes depending on temperature, humidity and absorbency of the subfloor.
• Coverage Rate (Approx.): 3m² per litre with 2mm x 6mm or B1 trowel
• Coverage Per Unit: 15m² with 2mm x 6mm trowel

Note: Coverage rates will depend on the condition and absorbency of the subfloor.