Categories

F Ball Stopgap SRS Surface Reinforcement System 5KG

F Ball Stopgap SRS Surface Reinforcement System 5KG

More Views

F Ball Stopgap SRS Surface Reinforcement System 5KG https://www.flooringhut.co.uk/media/catalog/product/cache/1/image/265x/9df78eab33525d08d6e5fb8d27136e95/s/r/srs_5kg_kit.jpg No F Ball Stopgap SRS Surface Reinforcement System 5KG
5 4.5 216

F Ball Stopgap SRS Surface Reinforcement System 5KG

F Ball Stopgap SRS Surface Reinforcement System 5KG F Ball Stopgap SRS Surface Reinforcement System 5KG is a solvent-free, low viscosity, two-component epoxy resin reinforcement material designed to quickly stabilise and reinforce poor and weak sand/cement or calcium sulphate screeds, including those containing hot water heating pipes. The product readily fills voids and cracks and binds loose particles resulting from poor installation and curing techniques of screeds. STOPGAP SRS, in most applications, can negate the need to remove and replace poorly compacted or weak screeds which can be costly and time-consuming, especially if the subfloor contains underfloor heating, thereby minimising disruption in the construction programme. The product may also be used over certain screeds containing high levels of construction moisture or where no effective damp proof membrane is present, prior to the application of STOPGAP F77 Waterproof Surface Membrane (Protocols for the use of STOPGAP F77 must be observed). An assessment should be made of the screed in question to determine the likelihood of success, as these instructions are for guidance purposes only and may contain information that may be inappropriate for certain sites. Specific information and testing requirements are available upon request from the Technical Service Department. COVERAGE Coverage will be approximately 3kg/m2 dependent upon depth and porosity of the screed. Weaker, more porous screeds may require up to 5kg/m2. Coverage rates are best determined by undertaking a small test area to evaluate the condition of the subfloor and help to calculate the quantity of material required. Pot life of mixed material in container @ 200C: 10 minutes Working time at 200C when applied to the subfloor: 30 minutes Setting time at 200C: 12 hours Drying time (ready to receive further treatments): 2-12 hours Application rate: 3-5kg/m² COVERAGE RANGE: 1 - 1.7m²

Be the first to review this product

Price: £88.59 inc vat
CALCULATE NO. OF Bag'S REQUIRED:
X

Order per Bag

Enter Code at Basket: 7percent
For extra 2% discount TODAY!

Popular product: In the past 6 months we have sold 6,631 of F Ball Stopgap

FINANCE YOUR PURCHASE
To help you spread the cost of your new flooring, we've partnered with DuoLogi to offer you a great choice of interest free payment plans. We're here to help you choose the right plan for your circumstances.

0% APR finance is currently available on all Burrnest & Real Textures products.

HOW DOES IT WORK?

Step one
Add enough qualifying goods to your basket to qualify for finance. Minimum order value £500 excluding VAT.

Step two
During the checkout select "Apply for finance".

Step three
Complete the DuoLogi Retail Finance application.

HOW DO I KNOW WHAT I WILL PAY?
We've built a very simple online calculator for you to see how much you'll pay on interest free and interest bearing payment plans.

HOW DO I KNOW IF I QUALIFY?
To qualify for one of our payment plan options, you must meet the following criteria:

You must be over the age of 18
Have a valid UK bank account
You must be a UK resident for at least the last 3 years
You must be in full time employment unless you are retired or have a spouse in full time employment
Download the attachements below
Stopgap Green Bag Data Sheet

Details

F Ball Stopgap SRS Surface Reinforcement System 5KG

F Ball Stopgap SRS Surface Reinforcement System 5KG is a solvent-free, low viscosity, two-component epoxy resin reinforcement material designed to quickly stabilise and reinforce poor and weak sand/cement or calcium sulphate screeds, including those containing hot water heating pipes. The product readily fills voids and cracks and binds loose particles resulting from poor installation and curing techniques of screeds.

STOPGAP SRS, in most applications, can negate the need to remove and replace poorly compacted or weak screeds which can be costly and time-consuming, especially if the subfloor contains underfloor heating, thereby minimising disruption in the construction programme.

The product may also be used over certain screeds containing high levels of construction moisture or where no effective damp proof membrane is present, prior to the application of STOPGAP F77 Waterproof Surface Membrane (Protocols for the use of STOPGAP F77 must be observed).

An assessment should be made of the screed in question to determine the likelihood of success, as these instructions are for guidance purposes only and may contain information that may be inappropriate for certain sites. Specific information and testing requirements are available upon request from the Technical Service Department.

COVERAGE

Coverage will be approximately 3kg/m2 dependent upon depth and porosity of the screed. Weaker, more porous screeds may require up to 5kg/m2.

Coverage rates are best determined by undertaking a small test area to evaluate the condition of the subfloor and help to calculate the quantity of material required.

  • Pot life of mixed material in container @ 200C: 10 minutes
  • Working time at 200C when applied to the subfloor: 30 minutes
  • Setting time at 200C: 12 hours
  • Drying time (ready to receive further treatments): 2-12 hours
  • Application rate: 3-5kg/m²
  • COVERAGE RANGE: 1 - 1.7m²

Additional Information

Manufacturer F Ball
Range F Ball Stopgap
No reviews yet.

    Write Your Own Review

    You're reviewing: F Ball Stopgap SRS Surface Reinforcement System 5KG

    How do you rate this product?

    Your honest feedback
    helps other visitors
    in selecting their products


    F Ball Stopgap SRS Surface Reinforcement System 5KG


    Related Products F-Ball

    "Flooring Hut will be our one point of call in the future. They cover a wide range of flooring and accessories with an easy to navigate website. Plus good customer service in dealing with questions or queries we may have. I had no problems with deliveries which enable our Company to complete our projects over the Christmas period. "

    Tim
    10th January 2020


    COVID-19: ALL FORBO & LUVANTO PRODUCTS, DELIVERIES AS NORMAL. OTHER PRODUCTS, UNFORTUNATELY EARLIEST DELIVERIES EST. 27.04.